Gaggenau BS 470 Instruction Manual

Also see for BS 470: Installation instructions Use and care manual Instruction manual Instruction manual

Contents

Gaggenau BS 470 Instruction Manual Manual pdf 36 page image

36--------Power cutYour appliance can bridge a power cut of a fewseconds. Operation continues.If the power cut was for a longer period and theappliance was in operation, a message appears in thedisplay. Operation is interrupted.Set the function selector to 0, then the appliance can beoperated again as usual.Demo modeThe ° symbol appears on the display when theappliance is in demo mode. The appliance will not heatup.Briefly disconnect the appliance from the mains (switchoff the household fuse or the circuit breaker in the fusebox). Then deactivate demo mode in the basic settingswithin 3 minutes (see section entitled 'Basic settings').Replacing the oven lightFor technical reasons the lamp cover cannot beremoved. Lamp must only be replaced by Gaggenauafter-sales service.Caution!Do not remove the lamp cover. This will damage thesealing.If the lamp cover in the oven is damaged, it must bereplaced. You can obtain covers from the after-salesservice. Please supply your appliance's E number andFD number.Error message "Exxx" If an error message is displayed, turnthe function selector to 0; if the displaygoes out, there was a non-recurringproblem. If the error occurs repeatedlyor the display remains on, please con-tact the after-sales service and informthem of the error code.