Garmin Edge 820 Owner's Manual

Also see for Edge 820: Owner's manual Owner's manual

Garmin Edge 820 Owner's Manual Manual pdf 10 page image

Setting a Training TargetThe training target feature works with the Virtual Partner featureso you can train toward a set distance, distance and time, ordistance and speed goal. During your training activity, the devicegives you real-time feedback about how close you are toachieving your training target.1 Select Training > Set a Target.2 Select an option:• Select Distance Only to select a preset distance or entera custom distance.• Select Distance and Time to select a distance and timetarget.• Select Distance and Speed to select a distance andspeed target.The training target screen appears, indicating your estimatedfinish time. The estimated finish time is based on your currentperformance and the time remaining.3 Select .4 Select to start the timer.5 If necessary, scroll to view the Virtual Partner screen.6 After you complete your activity, select > Save Ride.Personal RecordsWhen you complete a ride, the device displays any newpersonal records you achieved during that ride. Personalrecords include your fastest time over a standard distance,longest ride, and most ascent gained during a ride.Viewing Your Personal RecordsSelect > My Stats > Personal Records.Reverting a Personal RecordYou can set each personal record back to the one previouslyrecorded.1 Select > My Stats > Personal Records.2 Select a record to revert.3 Select Previous Record > .NOTE: This does not delete any saved activities.Deleting a Personal Record1 Select > My Stats > Personal Records.2 Select a personal record.3 Select > .Training Zones• Heart rate zones (Setting Your Heart Rate Zones, page 11)• Power zones (Setting Your Power Zones, page 13)NavigationNavigation features and settings also apply to navigatingcourses (Courses, page 7) and segments (Segments,page 3).• Locations and finding places (Locations, page 6)• Planning a course (Courses, page 7)• Route settings (Route Settings, page 8)• Map settings (Map Settings, page 8)LocationsYou can record and store locations in the device.Marking Your LocationBefore you can mark a location, you must locate satellites.If you want to remember landmarks or return to a certain spot,you can mark a location.1 Go for a ride.2 Select Navigation > > Mark Location > .Saving Locations from the Map1 Select Navigation > > Select Search Area > A MapPoint.2 Browse the map for the location.3 Select the location.Location information appears at the top of the map.4 Select the location information.5 Select > .Navigating to a Location1 Select Navigation.2 Select an option:• Select Search Tools to navigate to a point of interest, city,intersection, or known coordinates.TIP: You can select to narrow your search area.• Select Addresses to enter a specific address.• Select Saved Locations to navigate to a saved location.TIP: You can select to enter specific searchinformation.• Select Recent Finds to navigate to one of the last 50locations you have found.• Select > Select Search Area to narrow your searcharea.3 Select a location.4 Select Ride.5 Follow the on-screen instructions to your destination.Navigating to Known Coordinates1 Select Navigation > Search Tools > Coordinates.2 Enter the coordinates, and select .3 Follow the on-screen instructions to your destination.Navigating Back to StartAt any point during your ride, you can return to the starting point.1 Go for a ride (Going for a Ride, page 3).2 During your ride, select anywhere on the screen to view thetimer overlay.3 Select > Navigation > Back to Start.4 Select Along Same Route or Most Direct Route.5 Select Ride.The device navigates you back to the starting point of yourride.Stopping Navigation1 Scroll to the map.2 Select > .6 Navigation