Garmin Edge 820 Owner's Manual

Also see for Edge 820: Owner's manual Owner's manual

Garmin Edge 820 Owner's Manual Manual pdf 7 page image

The front of the device should be oriented toward the sky.2 Wait while the device locates satellites.It may take 30–60 seconds to locate satellite signals.TrainingGoing for a RideIf your device was packaged with an ANT+ sensor, they arealready paired and can be activated during initial setup.1 Hold to turn on the device.2 Go outside, and wait while the device locates satellites.The satellite bars turn green when the device is ready.3 From the home screen, select .4 Select to start the timer.NOTE: History is recorded only while the timer is running.5 Swipe left or right to view additional data screens.You can swipe down from the top of the data screens to viewthe connections screen.6 If necessary, tap the screen to view the timer overlay.7 Select to stop the timer.TIP: Before you save this ride and share it on your GarminConnect account, you can change the ride type. Accurateride type data is important for creating bike friendly courses.8 Select Save Ride.9 Select .Using Virtual Partner®Your Virtual Partner is a training tool designed to help you meetyour goals.1 Go for a ride.2 Scroll to the Virtual Partner page to see who is leading.3 If necessary, use and to adjust the speed of the VirtualPartner during your ride.SegmentsFollowing a segment: You can send segments from yourGarmin Connect account to your device. After a segment issaved to your device, you can follow the segment.NOTE: When you download a course from your GarminConnect account, all segments in the course are downloadedautomatically.Racing a segment: You can race a segment, trying to match orexceed your personal record or other cyclists who haveridden the segment.Strava™ SegmentsYou can download Strava segments to your Edge device. FollowStrava segments to compare your performance with your pastrides, friends, and pros who have ridden the same segment.To sign up for a Strava membership, go to the segments widgetin your Garmin Connect account. For more information, go towww.strava.com.The information in this manual applies to both Garmin Connectsegments and Strava segments.Following a Segment From the WebBefore you can download and follow a segment from GarminConnect, you must have a Garmin Connect account (GarminConnect, page 15).1 Connect the device to your computer using the USB cable.NOTE: If you are using Strava segments, your favoritesegments are transferred automatically to your device when itis connected to Garmin Connect Mobile or your computer.2 Go to www.garminconnect.com.3 Create a new segment, or select an existing segment.4 Select Send to Device.5 Disconnect the device, and turn it on.6 Select Training > Segments.7 Select the segment.8 Select Map > Ride.Enabling SegmentsYou can enable segment racing and prompts that alert you toapproaching segments.1 Select Training > Segments.2 Select a segment.3 Select Enable.NOTE: Prompts alerting you to approaching segmentsappear only for enabled segments.Racing a SegmentSegments are virtual race courses. You can race a segment,and compare your performance to past activities, other riders'performance, connections in your Garmin Connect account, orother members of the cycling community. You can upload youractivity data to your Garmin Connect account to view yoursegment position.NOTE: If your Garmin Connect account and Strava account arelinked, your activity is automatically sent to your Strava accountso you can review the segment position.1 Select to start the activity timer, and go for a ride.When your path crosses an enabled segment, you can racethe segment.2 Start racing the segment.The segment data screen appears automatically.Training 3