Garmin Edge 820 Owner's Manual

Also see for Edge 820: Owner's manual Owner's manual

Garmin Edge 820 Owner's Manual Manual pdf 11 page image

Projecting a LocationYou can create a new location by projecting the distance andbearing from a marked location to a new location.1 Select Navigation > Saved Locations.2 Select a location.3 Select the location information at the top of the screen.4 Select > Project Location.5 Enter the bearing and distance to the projected location.6 Select .Editing Locations1 Select Navigation > Saved Locations.2 Select a location.3 Select the information bar at the top of the screen.4 Select .5 Select an attribute.For example, select Change Elevation to enter a knownaltitude for the location.6 Enter the new information, and select .Deleting a Location1 Select Navigation > Saved Locations.2 Select a location.3 Select the location information at the top of the screen.4 Select > Delete Location > .CoursesFollowing a previously recorded activity: You can follow asaved course simply because it is a good route. For example,you can save and follow a bike friendly commute to work.Racing against a previously recorded activity: You can alsofollow a saved course, trying to match or exceed previouslyset performance goals. For example, if the original coursewas completed in 30 minutes, you can race against a VirtualPartner trying to complete the course in under 30 minutes.Following an existing ride from Garmin Connect: You cansend a course from Garmin Connect to your device. Once itis saved to your device, you can follow the course or raceagainst the course.Planning and Riding a CourseYou can create and ride a custom course. A course is asequence of waypoints or locations that leads you to your finaldestination.1 Select Navigation > Courses > Course Creator > Add FirstLocation.2 Select an option:• To select your current location on the map, select CurrentLocation.• To select a saved location, select Saved, and select alocation.• To select a location for which you recently searched,select Recent Finds, and select a location.• To select a location on the map, select Use Map, andselect a location.• To browse for and select a point of interest, select POICategories, and select a nearby point of interest.• To select a city, select Cities, and select a nearby city.• To select an address, select Addresses, and enter theaddress.• To select an intersection, select Intersections, and enterthe street names.• To use coordinates, select Coordinates, and enter thecoordinates.3 Select Use.4 Select Add Next Location.5 Repeat steps 2 through 4 until you have selected all locationsfor the route.6 Select View Map.The device calculates your route, and a map of the routeappears.TIP: You can select to view an elevation plot of the route.7 Select Ride.Following a Course From Garmin ConnectBefore you can download a course from Garmin Connect, youmust have a Garmin Connect account (Garmin Connect,page 15).1 Select an option:• Open the Garmin Connect Mobile app.• Go to www.garminconnect.com.2 Create a new course, or select an existing course.3 Select Send to Device.4 Follow the on-screen instructions.5 On the Edge device, select Navigation > Courses > SavedCourses.6 Select the course.7 Select Ride.Creating and Riding a Round-Trip CourseThe device can create a round-trip course based on a specifieddistance, starting location, and direction of navigation.1 Select Navigation > Courses > Round-Trip Course.2 Select Distance, and enter the total distance for the course.3 Select Start Location.4 Select an option:• To select your current location on the map, select CurrentLocation.• To select a saved location, select Saved, and select alocation.• To select a location for which you recently searched,select Recent Finds, and select a location.• To select a location on the map, select Use Map, andselect a location.• To browse for and select a point of interest, select POICategories, and select a nearby point of interest.• To select a city, select Cities, and select a nearby city.• To select an address, select Addresses, and enter theaddress.• To select an intersection, select Intersections, and enterthe street names.• To use coordinates, select Coordinates, and enter thecoordinates.5 Select Start Direction, and select a direction heading.6 Select Search.TIP: You can select to search again.7 Select a course to view it on the map.TIP: You can select and to view the other courses.8 Select Ride.Tips for Training with Courses• Use turn guidance (Course Options, page 8).Navigation 7