Garmin G1000 Cockpit Reference Guide for the Columbia 350/400 190-00567-01 Rev. A8-2SECTION 8 – FLIGHT PLANNING3) Press the ENT Key. The User Waypoint InformationPage is now displayed with the captured position.4) Turn the FMS Knobs to select a waypoint name.5) Press the ENT Key to accept the selected name. Thefirst reference waypoint field is highlighted.6) If desired, turn the FMS Knobs to enter the identifierof the reference waypoint and the radial anddistance to the reference waypoint. Press the ENTKey to accept.7) Press the FMS Knob to remove the flashing cursor orpress the GO BACK Softkey to return to the map.8.2 VIEWING THE ACTIVE FLIGHT PLANPress the FPL Key.Figure 8-2 Active Flight Plan Window on the PFDFigure 8-3 Active Flight Plan Page on the MFD8.3 ACTIVATE A STORED FLIGHT PLAN1) Press the FPL Key and turn the small FMS Knob todisplay the Flight Plan Catalog Page.Figure 8-4 Flight Plan Catalog Page2) Press the FMS Knob to activate the cursor.3) Turn the large FMS Knob to highlight the desiredflight plan and press the ACTIVE Softkey.4) With ‘OK’ highlighted, press the ENT Key to activatethe flight plan. To cancel the flight plan activation,turn the large FMS Knob to highlight ‘CANCEL’ andpress the ENT Key.8.4 ACTIVATE A FLIGHT PLAN LEG1) From the Active Flight Plan Page, press the FMSKnob to activate the cursor and turn the largeFMS Knob to highlight the desired destinationwaypoint.2) Press the ACT LEG Softkey (using MFD only).Or:Press the MENU Key, select the ‘Activate Leg’ optionfrom the page menu and press the ENT Key. This
