Garmin G1000 Cockpit Reference Guide for the Columbia 350/400 190-00567-01 Rev. A8-6SECTION 8 – FLIGHT PLANNING10) Turn either FMS Knob to highlight the desired exitpoint.Figure 8-18 Select Desired Exit Point11) With the desired exit point highlighted, press theENT Key.12) With ‘LOAD?’ highlighted, press the ENT Key.Figure 8-19 Airway Added to Flight Plan8.9 LOAD A DEPARTURESee the Procedures section for a discussion on loadingand activating departure procedures.8.10 LOAD AN ARRIVALSee the Procedures section for a discussion on loadingand activating arrival procedures.8.11 LOAD AN APPROACHSee the Procedures section for a discussion on loadingand activating approach procedures.8.12 REMOVE A DEPARTURE, ARRIVAL,APPROACH, OR AIRWAY FROM AFLIGHT PLAN1) With the Active or Stored Flight Plan Page displayed,press the FMS Knob to activate the cursor.2) Turn the large FMS Knob to highlight the title forthe approach, departure, arrival, or airway to bedeleted. Titles appear in white directly above theprocedure’s waypoints.3) Press the CLR Key to display a confirmation window.With ‘OK’ highlighted, press the ENT Key to removethe selected procedure or airway.8.13 STORE A FLIGHT PLAN1) After creating a flight plan on either the PFD orMFD, it may be saved by pressing the MENU Key.2) Turn the large FMS Knob to highlight ‘Store FlightPlan’ and press the ENT Key.3) With ‘OK’ highlighted, press the ENT Key to storethe flight plan.Figure 8-20 Store Flight Plan Confirmation8.14 EDIT A STORED FLIGHT PLAN1) Press the FPL Key and turn the small FMS Knob todisplay the Flight Plan Catalog Page.2) Press the FMS Knob to activate the cursor.3) Turn the large FMS Knob to highlight the desired
