Garmin G3X Touch Pilot’s Guide190-01754-00 Rev. E87CNS InterfaceSystemOverviewFlightInstruments EISCNSInterfaceGPSNavigationFlightPlanningHazardAvoidanceAdditionalFeatures AFCS Annun/Alerts Appendix IndexIDENT FUNCTION (GDU 46X)NOTE: The Ident function on the GDU 45X is displayed on the TransponderPage when touching the Transponder Data Box on the PFD.Touching IDENT sends a distinct identity indication to Air Traffic Control (ATC).The indication distinguishes the identing transponder from all the others on the airtraffic controller’s screen. After touching IDENT the bar on the button turns greenmomentarily.ADS-B OUTWhen configured with an ADS-B Out capable transponder, ‘NO ADSB’ is displayedin yellow, in the Transponder Data Box, if the ADS-B Out broadcast has been manuallydisabled or if the transponder does not have the required GPS data.FLIGHT ID REPORTINGNOTE: The Flight ID must be configured to ‘Set By Pilot’ in ConfigurationMode for the Flight ID option to appear on the Transponder Page. Refer tothe G3X Touch Installation Manual for more information.Entering a Flight ID:1) Touch the transponder data box on the PFD.2) Touch Flight ID.3) Enter the Flight ID using the keypad and touch Enter.Flight ID (Transponder Data Box) (GDU 46X)
