Garmin G3X Touch Pilot’s Guide 190-01754-00 Rev. E28System OverviewSystemOverviewFlightInstrumentsEISCNSInterfaceGPSNavigationFlightPlanningHazardAvoidanceAdditionalFeaturesAFCSAnnun/AlertsAppendixIndex1) Touch the Transponder on the PFD.2) Touch the ‘Flight ID’ Field.3) Enter the Flight ID and touch Enter.Enabling/disabling ADS-B Transmit:1) Press the MENU Key twice.2) Touch Setup > Transponder.3) Touch the ‘ADS-B Transmit’ Field.4) Touch ‘Enabled’ or ‘Disabled’.DATA BARData BarRefer to the Annunciations and Alerts Section for a list of available Data Bar Fieldoptions.Changing the information shown in the data bar fields:1) Press the MENU Key twice.2) Touch Setup > Data Bar > Change....3) Touch one of the data bar fields.4) Touch a new data field from the list.DISPLAYThe Backlight Intensity (display brightness) can be set to ‘Manual’, ‘Light Bus’, or‘Photo Cell’. With ‘Manual’ selected, the pilot can manually adjust the desired backlightintensity. After each power cycle the Backlight Intensity is set to the default, which isconfigurable. Refer to the G3X Touch Installation Manual for more information.Adjusting backlight intensity:1) Press the MENU Key twice.2) Touch Setup > Display.3) Touch the ‘Backlight Control’ Field.4) Touch Manual.5) Touch the ‘Backlight Intensity’ Field.
