3-57190-01102-02 Rev. E Garmin G500 Pilot’s GuideForewordSec 1SystemSec 2PFDSec 3MFDSec 4HazardAvoidanceSec 5AdditionalFeaturesSec 6Annun.& AlertsSec 7SymbolsSec 8Glossary Appendix AAppendix BIndex3.4.5.2 Zoom1) While viewing the External Video function, press the Up Rng Arrow key toincrease the zoom up to 10x magnification. Zoom level is made through digitalmagnification.2) Press the Down Rng Arrow key to decrease the zoom level down to aminimum of 1x.3.4.5.3 Panning1) While viewing the External Video function, press the small MFD knob toactivate panning.2) Turn the small MFD knob clockwise to pan up (the map will move down).3) Turn the small MFD knob counterclockwise to pan down (the map will moveup).4) Turn the large MFD knob clockwise to pan to the right (the map will moveleft).5) Turn the large MFD knob counterclockwise to pan to the left (the map willmove right).6) Press the small MFD knob to exit panning.3.4.5.4 SetupThe display of each video source is set up individually.1) While viewing the External Video page, press the soft key for the desired Videosource (Video 1 or Video 2).2) Press the Setup soft key.3) The Current value for Brightness will be selected. Use the following directionsfor each value.Figure 3-85 External Video Setup4) After selecting the desired settings, press the small MFD knob or the Setupsoft key to exit editing.
