2-29190-01102-02 Rev. E Garmin G500 Pilot’s GuideForewordSec 1SystemSec 2PFDSec 3MFDSec 4HazardAvoidanceSec 5AdditionalFeaturesSec 6Annun.& AlertsSec 7SymbolsSec 8Glossary Appendix AAppendix BIndex2.8.2 Temperature DisplayThe Outside Air Temperature (OAT) is displayed to the left of the HSI. TheOAT can be displayed in ºF or ºC, which is configured in the Aux System SetupPage. The temperature is derived from the Temperature Probe on the aircraft.The displayed temperature is the Static Air Temperature reported by the Air DataComputer. This temperature value is corrected for ram air heating effects.Figure 2-38 HSI Outside Air Temperature2.8.3 Wind VectorsWhen selected, wind vector information is displayed in a window on thePFD to the left of the HSI. The Wind Vector style is configured in the Aux ModeSystem Setup page. While on the ground, the Wind Vector window will indicate“No Wind Data.”Figure 2-39 Wind Vector with No Wind DataFour styles are available as shown below.Style 1 Style 2 Style 3 Style 4Figure 2-40 Wind Vector Style2.8.4 DME IndicationWhen selected, DME information is displayed in a window in the lower leftcorner of the PFD. The distance to the station and the Nav source used areshown.Selected DMEDME InformationSet Hold for Selected DMEDME Hold AnnunciationFigure 2-41 DME Indication
