2-23190-01102-02 Rev. E Garmin G500 Pilot’s GuideForewordSec 1SystemSec 2PFDSec 3MFDSec 4HazardAvoidanceSec 5AdditionalFeaturesSec 6Annun.& AlertsSec 7SymbolsSec 8Glossary Appendix AAppendix BIndex1) Press the CDI soft key to toggle between GPS and VOR/LOC source type.2) Press 1-2 soft key to toggle between the 1 and 2 navigators of the GPS or VOR/LOC sources.3) Verify the navigation source by the indication on the HSI and in the upper leftcorner of the PFD.NOTE: The selected navigator is the active navigator for all PFD and MFDoperations, except for the supplemental bearing pointers.2.7.2 Changing CDI CourseThe Selected Course is shown to the upper left of the HSI for 10 seconds afterbeing adjusted.New Course SettingFigure 2-31 Course Setting1) Press the CRS key to activate Course mode.2) Turn the PFD knob to change the Course values.OR3) Press the PFD knob to set a Course that will center the CDI to the VOR stationor waypoint if in GPS OBS mode.
