5-13190-01102-02 Rev. E Garmin G500 Pilot’s GuideForewordSec 1SystemSec 2PFDSec 3MFDSec 4HazardAvoidanceSec 5AdditionalFeaturesSec 6Annun.& AlertsSec 7SymbolsSec 8Glossary Appendix AAppendix BIndex5.2.2 Viewing Chart Details in ChartViewNOTE: The chart for the destination airport or loaded approach willautomatically be selected.NOTE: Chart details are only available for instrument approach procedurecharts. Chart details are not available for airport diagrams or SID/STARcharts.1) While viewing the Charts page of the FPL page group, press the SELECT softkey to activate chart selection.2) Turn the large MFD knob to highlight the field to the right of the airportidentifier.3) Turn the small MFD knob to highlight the desired chart.Figure 5-12 Activate Chart Selection for the Current Airport (ChartView shown)
