4-16Garmin G500 Pilot’s Guide 190-01102-02 Rev. EForewordSec 1SystemSec 2PFDSec 3MFDSec 4HazardAvoidanceSec 5AdditionalFeaturesSec 6Annun.& AlertsSec 7SymbolsSec 8GlossaryAppendix AAppendix BIndexTraffic Advisory,Off Scale Aircraftis Out of Range,1200 ft Above andClimbingOperatingModeTraffic Advisory,Aircraft is 1200 ftAbove and ClimbingRange Ring DiameterNon-ThreatTraffic Proximity Advisory,1200 ft Above andClimbingNon-Bearing Traffic (System is Unable toDetermine Bearing), Aircraft Distance is8.0 NM, 1100 ft Above and DescendingOwnshipSymbolFigure 4-16 Traffic Map Page - TAS4.6.1.1 Switching from Standby Mode to Operating ModesThe unit must be in operating mode for traffic to be displayed. The abilityto switch from standby to operating mode on the ground is especially useful forscanning the airspace around the airport before takeoff.1) While viewing the Traffic Page of the MAP page group, select the OPERATE softkey or press the MENU key and turn the small MFD knob to select OperatingMode.2) To switch to Standby Mode from the Traffic Page, select the STANDBY softkey.NOTE: Not all TAS systems can be controlled from the G500. The Operate/Standby soft keys may not be displayed. An alert will be generated whenStandby is selected and the aircraft is in the air.
