Garmin GIA 63 Installation Manual

Also see for GIA 63: Installation manual Installation manual Installation manual

190-00303-05 GIA 63 Installation ManualRev. Y Page 1-91.4.9 Glideslope Specifications1.4.10 Power RequirementsTable 1-8. GIA 63(X) Glideslope SpecificationsCharacteristic SpecificationSensitivity At –93 dBm, deviation output shall not be less than 60% of standarddeflection when glideslope deviation test signal is appliedCentering Accuracy 0 ± .0091 ddm or 0 ± 7.8 mVSelectivity 6 dB BW is greater than 17 kHz69 dB BW is less than 132 kHzStandard deflectiona) With a standard deflection ‘FLY DOWN’ condition (90 Hz dominant), theoutput shall be -78 mV ± 7.8 mVb) With a standard deflection ‘FLY UP’ condition (150 Hz dominant), theoutput shall be +78 mV ± 7.8 mVFlagThe GS Course Deviation Flag must be flagged:a) When the level of a standard deviation test signal produces 50% or less ofstandard deflection of the deviation indicatorb) In the absence of 150 Hz modulationc) In the absence of 90 Hz modulationd) In the absence of both 90 Hz and 150 Hz modulatione) In the absence of RFTable 1-9. GIA 63(X) Power SpecificationsCharacteristic SpecificationInput Voltage RangeFor P601:011-00781-0X and 011-01105-0X: 28 Vdc011-01105-2X/-3X: 14/28 Vdc011-01105-4X: 28 VdcFor P605:011-00781-0X and 011-01105-0X/-1X/-2X/-3X: 14/28 Vdc011-01105-4X: 28 VdcSee the Environmental Qualification Form for details on surge ratings andminimum/maximum operating voltages.Power Requirementsfor P601(COM Connector)011-00781-0X and 011-01105-0X/-2X/-3X:0.3 A max @ 27.5 Vdc (not transmitting);4.3 A max @ 27.5 Vdc (transmitting)011-01105-4X:0.4 A max @ 27.5 Vdc (not transmitting);4.4 A max @ 27.5 Vdc (transmitting)011-01105-2X/-3X only:0.6 A max @ 13.75 Vdc (not transmitting);6.0 A max @ 13.75 Vdc (transmitting)