Garmin GIA 63 Installation Manual

Also see for GIA 63: Installation manual Installation manual Installation manual

190-00303-05 GIA 63 Installation ManualRev. Y Page 3-33.3 Antenna InstallationFor the COM, VOR/LOC, and Glideslope antenna, follow the manufacturers’ instructions. Avoid runningother wires and coaxial cables near the VOR/LOC antenna cable.CAUTIONDo not use construction grade RTV sealant or sealants containing acetic acid. Thesesealants may damage the electrical connections to the antenna. Use of these type sealantsmay void the antenna warranty.3.4 Cable Installation1. Route the coaxial cable to the rack location keeping in mind the recommendations of Section 2.Secure the cable in accordance with good aviation practice.2. Trim the coaxial cable to the desired length and install the BNC connector (330-00087-00) per thecabling instructions on Figure 3-1. If the connector is provided by the installer, follow theconnector manufacturer’s instructions for cable preparation.Figure 3-1. Coaxial Cable Installation3. Contacts for the 78, 62, and 44 pin connectors must be crimped onto the individual wires of theaircraft wiring harness. Tables 3-1 and 3-2 list contact part numbers (for reference) andrecommended crimp tools.