190-00303-05 GIA 63 Installation ManualRev. Y Page 2-12 INSTALLATION OVERVIEW2.1 IntroductionThis section provides hardware equipment information for installing the GIA 63(X), related hardware, andantennas. Installation of the GIA 63(X) should follow the aircraft TC or STC requirements. Cabling isfabricated by the installing agency to fit each particular aircraft. The guidance of FAA advisory circularsAC 43.13-1B and AC 43.13-2B, where applicable, may be found useful for making retro-fit installationsthat comply with FAA regulations. Refer to the G1000 System Installation Manual, Garmin part number190-00303-00 for further details on the mechanical aspects. For installation in an aircraft using the remotemounted standalone rack, refer to Appendix B for rack drawings and dimensions.2.1.1 Unit ConfigurationsThe GIA 63(X) is only available as a single unit under the following part numbers.Table 2-1. GIA 63(X) Part NumbersItem Garmin P/NGIA 63 Unit Only, (011-00781-00) 010-00335-00GIA 63 ETSO Unit Only, (011-00781-01) 010-00335-10GIA 63W Unit Only, (011-01105-00) 010-00386-00GIA 63W A2/B2 Audio Lightning Unit Only (011-01105-01) 010-00386-10GIA 63W Updated NAV/COM (011-01105-20) 010-00386-20GIA 63H (011-01105-30)* 010-00386-30GIA 63W with Enhanced COM (011-01105-40) 010-00386-40*Only the 010-00386-30 GIA 63H unit together with the 011-02425-00 Rack & 011-00963-01 Back Plate is approved for DO-160F,Category U, Curve G vibration levels.