Garmin GIA 63 Installation Manual
Also see for GIA 63: Installation manualInstallation manualInstallation manual
                                                                                              | |
Contents
|
GIA 63 Installation Manual Page 2-13190-00303-05 Revision T2.8 Mounting RequirementsThe GIA 63(X) mounting surface must be capable of providing structural support and electrical bond tothe aircraft to minimize radiated EMI and provide protection from High-Intensity Radiation Fields(HIRF). The GIA 63(W) can be mounted using the G1000 modular system rack, or may be mountedremotely using the Standalone rack. The GIA 63H must be mounted in the Helicopter Rack. Refer todrawings in Appendix B.2.8.1 Modular Rack ConsiderationsFigure 2-2 and Figure B-2 show the GIA 63(W) G1000 modular rack. The modular rack is fastened tothe main system rack using the nutplate kit listed in Section 2.1.2. Refer to Figure B-2 for nutplateplacement locations. Figure B-1 gives the GIA 63(W) modular rack dimensions.The unit may also be mounted outside of the G1000 system rack. The number and positions of screwsnoted in Figure B-2 are to be used when mounting the GIA 63(W) modular rack outside of the G1000system rack. Aircraft manufacturer must fabricate any additional mounting equipment needed, useoutline and installation drawings in Appendix B for reference.Figure 2-2 GIA 63(W) Modular RackDRAFT Rev T 11/12/2010 |
Related manuals for Garmin GIA 63
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine