Garmin GIA 63 Installation Manual
Also see for GIA 63: Installation manualInstallation manualInstallation manual
                                                                                              | |
Contents
|
GIA 63 Installation Manual Page 4-21190-00303-05 Revision T4.7.2.3 To/FromPin Name Connector Pin I/OVOR/LOC +TO P602 1 OutVOR/LOC +FROM (VOR/LOC COMMON)VOR/LOC +FROM (NAV COMMON)(011-01105-20 AND 011-01105-30 ONLY)P602 2 OutThe output is capable of driving up to three 200 Ω meter loads. When indicating TO, the output is+225 ±75 mV DC. When indicating FROM, output is -225 ±75 mVDC. When invalid information is present(Flag IN VIEW) the TO/FROM output is 0 ±10 mV DC.4.7.2.4 FlagPin Name Connector Pin I/OVOR/LOC +FLAG P602 3 OutVOR/LOC -FLAG (VOR/LOC COMMON)VOR/LOC -FLAG (NAV COMMON)(011-01105-20 AND 011-01105-30 ONLY)P602 4 OutGLIDESLOPE +FLAG P602 32 OutGLIDESLOPE -FLAG (GLIDESLOPE COMMON)GLIDESLOPE –FLAG (NAV COMMON)(011-01105-20 AND 011-01105-30 ONLY)P602 53 OutThe Flag output is capable of driving up to three 1000 Ω meter loads. When valid information is present(Flag OUT OF VIEW) the Flag output is 375 ±80 mV DC. When invalid information is present (Flag INVIEW) the Flag output is 0 ±25 mV DC.4.7.2.5 OBSPin Name Connector Pin I/OVOR OBS ROTOR C P602 9 OutVOR OBS ROTOR H (GROUND) P602 10 --VOR OBS STATOR E (VOR/LOC COMMON)VOR OBS STATOR E (NAV COMMON)(011-01105-20 AND 011-01105-30 ONLY)P602 11 OutVOR OBS STATOR F P602 12 InVOR OBS STATOR D P602 13 InVOR OBS STATOR G (VOR/LOC COMMON)VOR OBS STATOR G (NAV COMMON)(011-01105-20 AND 011-01105-30 ONLY)P602 14 OutVOR OBS ROTOR C and H are a buffered 500 Hz output that is intended to drive the OBS rotors. VOROBS STATOR D and VOR OBS STATOR F are each phase and amplitude shifted version of the VORROTOR C output. Each pair is intended to read one of the two windings of the indicator’s OBS stator.DRAFT Rev T 11/12/2010 |
Related manuals for Garmin GIA 63
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine