11 190-00607-02 Rev CDetailed OperationSystemAutoLoad Electronic ChartsThis is only available when installed with a GPSnavigator that supports the MapMX communicationprotocol (e.g., GNS 480 series). This feature must bedisabled when the GMX 200 is connected to a GPSnavigator that does not support the MapMX communi-cation protocol. It allows the GPS navigator to instructthe GMX 200 to load a selected approach chart.Press the Next Page key to display the next pageof menu items.Altitude UnitsPress the Altitude Units key to set the display ofaltitude in either feet or meters. Altitude units cannotbe set to meters if a traffic source is installed.System Nav Setup Menu Items (Page 3)Map DetailPress the Map Detail key to toggle the choices fordecluttering the map displays. In areas where there is agreat number of information available, these selectionswill help you control the amount of displayed infor-mation at various zoom levels.System Info PagesPress the Info function key, if necessary, to dis-play the System Info pages. These pages show SystemInformation, Port Status, Data Link Status, AdditionalFeatures, and Hardware status for your GMX 200system. This information will be useful should youneed to contact customer service. Press the key to theright of the menu label to reach the desired Info page.System InformationThe System Information window shows the SystemID and the Software and Hardware versions, as well asthe installed Databases and their expiration dates orversion.System Info - System Page