3-32 GPS 175/GNX 375 Pilot’s Guide 190-02207-02 Rev. 1Navigation3.8 Creating a Flight PlanNOTEThe unit cannot verify the accuracy of cataloged flight plans with modifiedprocedures.You can create a flight plan one of three ways.• Creating a new flight plan from the active flight plan• Creating a flight plan from the Map page• Creating a new flight plan in the catalogFlight plans are listed by the departure and destination waypoint identifiers. Thedestination waypoint is the last airport in the flight plan.CREATE A NEW FLIGHT PLAN1. From the Home page, tap Flight Plan > Menu > Delete > OK to delete theexisting active flight plan. If there is no active flight plan, continue to the nextstep.2. Tap Add Waypoint > select a waypoint identifier > Enter, repeat as required.CREATE A FLIGHT PLAN FROM THE MAP PAGE1. Tap the Map page display > Graphical Edit.2. Tap the first flight plan location waypoint on the map. If there are nearbywaypoints, select the location waypoint.3. Tap the next location waypoint or airway on the map and continue addinglocations as required and tap Done when finished.CREATE A NEW FLIGHT PLAN IN THE CATALOGIt is not recommended to save flight plans with modified procedures in the flight plancatalog.1. Tap Flight Plan > Menu > Catalog.2. At the end of the flight plan list in the Catalog, tap Create New CatalogRoute.3. Tap Add Waypoint > select a waypoint identifier4. Tap Menu > Direct-To (or Preview > Activate).
