Navigation190-02207-02 Rev. 1 GPS 175/GNX 375 Pilot’s Guide 3-333.9 Waypoint OptionsSELECTION FUNCTIONInsert Before • Insert a new waypoint before the selected waypointInsert After • Insert a new waypoint after the selected waypointLoad PROC • Load and activate an approach, arrival, departure,missed approach, and vectors to finalLoad Airway • Assign an airway and exit waypoint to the selectedentry waypoint (e.g., intersection, VOR)Activate Leg • Designate any TO waypoint as the active legHold at WPT• Create a user-defined hold at the selected waypoint• Specify hold parameters and preview holdingpatterns from a dedicated menu pageWPT Info • Open the dedicated information page for theselected waypointRemove • Remove the selected waypoint or hold from theactive flight planSelecting a waypoint identifier opens a menu.Changes to the active flight plan take effectimmediately.• Insert a new waypoint into a flight plan• Add an airway or procedure• Change the active leg• Remove a selected waypoint• Add a holding pattern to an existing waypoint• View information about a waypoint