3-36 GPS 175/GNX 375 Pilot’s Guide 190-02207-02 Rev. 1NavigationDirect ToFEATURE LIMITATIONSNot all flight plan entries are note selectable using the Direct-To function (e.g., holdsand course reversals).NAVIGATION KEYSDIRECT-TO KEY KEY DESCRIPTIONDIRECT-TO Sets a course to a specified waypointDIRECT-TOACTIVATEActivates the loaded courseHOLDAllows you to set holding patterns with inbound oroutbound course guidance, left or right turns, and specifyleg length in time or distanceLOAD HOLDLoads holding patterns into the unit with a user-definedlocation inserted into a flight plan or using direct-tonavigationHOLD ACTIVATE Activates the loaded hold pattern, keeping the aircraft in ahold pattern until it is removedREMOVE Removes a hold on a waypointENTER Enters a value using the keypadLOAD APPROACH Loads the approach course into the GPS/GNX unitSelect awaypointTap Direct-ToActivate the waypoint