To mark your present position:1. Press and hold the ENTER/MARK key. The Mark Waypoint Page will appear, with adefault three-digit name for the new waypoint in the upper-left portion of the page.Let’s call our present position ‘HOME’. (If you were at home when you initial-ized your GPS III, you might want to keep this waypoint in memory for future use!)To rename the waypoint and change its symbol:1. Use the keypad to highlight the name field, and press ENTER.2. Enter the new waypoint name (‘HOME’) using the rocker keypad, and press ENTER.(Remember to use UP/DOWN to change the character and RIGHT to move to the nextcharacter field.)3. Highlight the waypoint symbol field and press ENTER.4. Select the ‘Residence’ symbol, and press ENTER.5. Move the cursor to the ‘DONE?’ prompt, and press ENTER.Now we have two waypoints in memory and on the map: ‘SIMUL8’ and ‘HOME’.It’s about time we get started, so let’s plug a speed into this simulator to animate thedisplays!To enter a simulated speed and animate the displays:1. Press PAGE repeatedly until the Compass Page appears.2. Enter a simulated speed of ‘10’ (mph or knots) using the rocker keypad. (Press UP onthe rocker keypad once to select ‘10’. The speed readout is on the upper right cornerof the Compass Page.)3. Press PAGE (or QUIT) repeatedly to return to the Map Page.To mark your present positionand save it as a waypoint,press and hold ENTER. Athree-digit name is automati-cally assigned to the waypoint.From the Compass Page youcan increase/decrease thesimulated speed using theUP/DOWN keys on therocker keypad.22SIMULATOR TOURMarking Present Position