To rename the waypoint:1. Highlight the waypoint name field and press ENTER.2. Use the rocker keypad to enter the new waypoint name and press ENTER.3. If finished, highlight ‘Done’ and press ENTER.To change the waypoint’s symbol:1. Highlight the waypoint symbol field and press ENTER.2. Use the rocker keypad to select the desired symbol and press ENTER. The selectedsymbol will be used to denote the waypoint position on the map display.3. If finished, highlight ‘Done’ and press ENTER.When a waypoint is created, the time and date of creation is automatically addedas a waypoint comment. You can edit this information or create a entirely newcomment, as needed.To edit the waypoint comment:1. Highlight the waypoint comment field and press ENTER.2. Use the rocker keypad to enter the desired comment and press ENTER.3. If finished, highlight ‘Done’ and press ENTER.To edit the waypoint position:1. Highlight the waypoint coordinates field to change the position coordinates, orhighlight the reference waypoint name, bearing or distance fields to change thereference waypoint information. Press ENTER to begin editing.2. Use the rocker keypad to enter the new information. Press ENTER to accept the newinformation.3. When finished, highlight ‘Done’ and press ENTER.The default waypoint com-ment is the time and date thewaypoint was created. Youcan enter your own commentusing the rocker keypad.Edit a waypoint’s position byentering the new positioncoordinates directly over theold position.46REFERENCEEditing Waypoints