Garmin GPS III A Owner's Manual

Also see for GPS III: Declaration of conformity Quick guide Owner's manual Owner's manual

To designate a GOTO waypoint from a list of waypoints:1. Highlight the desired waypoint on the list and press GOTO. A confirmation page showsthe selected destination waypoint.2. Press ENTER to confirm the selected waypoint and begin navigating.To GOTO an existing waypoint on the map display:1. Use the rocker keypad to place the arrow on the desired target waypoint.2. Press GOTO, followed by ENTER, to begin navigating.To GOTO any position on the map display:1. Use the rocker keypad to place the arrow on any position you wish to navigate to.2. Press GOTO to create a waypoint, called ‘MAP’, at the arrow position. Each time youperform this step it will overwrite any previously created ‘MAP’ waypoint.3. Press ENTER to being navigating.GOTO OptionsGOTO Options are also provided to initiate a TracBack route or cancel thecurrent GOTO destination.To display the GOTO Options, press MENU (immediately after pressingGOTO).The following options are available:TracBack— allows you to retrace your path using the track log automaticallystored in the receiver’s memory. This eliminates the need to store waypointsalong the way. (See page 52 for more information about TracBack.)By highlighting a waypointname on a list and pressingGOTO, you won’t have tomanually enter the name ofyour destination waypoint.A GOTO can also be initiatedfrom the map display by plac-ing the panning arrow on thedesired target waypoint.50REFERENCEGOTO / GOTO Options