Garmin GPS III A Owner's Manual

Also see for GPS III: Declaration of conformity Quick guide Owner's manual Owner's manual

To create a route from the map display:1. Press MENU twice to display the Main Menu.2. Highlight ‘Routes’ and press ENTER. The Route List is displayed, showing all routesstored in memory.3. Press MENU to display the Route Options.4. Highlight ‘New Route ’ and press ENTER. The GPS III creates a route called‘EMPTY- 1’. (The name changes as you add waypoints to the route, so make note ofthe route name for future reference.)5. Press MENU to display the New Route Options and highlight ‘Show Map’.6. Press ENTER and use the rocker keypad to place the arrow over the first route way-point. (Use the IN and OUT zoom keys to aid in locating the desired waypoint.)7. Press ENTER to accept the selected route waypoint.8. Highlight the next waypoint on the map display and press ENTER to add the waypoint tothe route. Repeat this step until all route waypoints have been added to the route.Press PAGE or QUIT to exit the page.9. You can also create route waypoints during this process. If no waypoint exists at thearrow location, the GPS III will automatically create one—using a three digit numberas the waypoint’s name. (You can rename the waypoint following the steps on page 46. )10. If you wish to include a city location in the route, place the arrow over the city andpress ENTER. A confirmation page will appear with the name of the city as a new way-point (sometimes abbreviated, depending on the length of the original name). To add tothe route, select ‘Use’ and press ENTER.As you add each new waypoint to the route, the data window at the top of the mapdisplay will show the name of the route you are creating, which includes the first andlast waypoints in the route. A solid route line will appear on the map to indicate eachleg, and a dotted line will appear to indicate the distance and bearing from the lastroute waypoint to the cursor position.To create a route directly fromthe map display, select ‘NewRoute’ from the Main Menu,then select ‘Show Map’ fromthe New Route Options.You can add city locations toa route by placing the editingarrow on a city and pressingENTER.55REFERENCECreating New Routes