Track Log Settings (cont.)Delete All allows you to clear all track logs, active and saved, from memory.To delete all track logs from memory:1. Select ‘Delete All’ from the Track Log Options and press ENTER.2. Press ENTER again to confirm (or QUIT to cancel).Setup Logging provides a setup screen to define how track log data will be recorded. TheSetup Logging Page provides options for ‘Record Mode’, ‘Interval’ and ‘Interval Value’.Record Mode lets you select one of three track recording options:‘Off’ – No track log will be recorded.NOTE: Selecting ‘Off’ will prevent you from using the TracBack feature.‘Fill’ – A track log will be recorded until the track memory is full.‘Wrap’ (default) – A track log will be continuously recorded, wrapping throughavailable memory; replacing the oldest track data with new data.Interval defines the frequency with which the track plot is recorded. Threeinterval settings are available:‘Resolution’ (default) – Records track log based upon a user-defined variancefrom your course over ground. The resolution option is recommended for themost efficient use of memory and TracBack performance. The distance value(entered in the ‘Interval Value’ field) is the maximum left/right deviationallowed from the last defined ground track before recording a new point.‘Time’ – Records track log based on a user-defined time interval.‘Distance’ – Records track log based on a user-defined distance between points.Interval Value defines the distance or time interval used to record the track log.Select ‘Save Active Log’ to savethe active log data for futureuse. This process extracts themost significant points alongthe active route (up to 250)and creates a ‘saved log’.The ‘Setup Logging’ optionallows you to change thecriteria used to record theactive track log.65REFERENCEMain Menu: Track Logs#?