Track Log SettingsTo view the Track Log Options, highlight ‘Active Log’ or any of the ‘Saved Logs’(on the Track Logs Page) and press MENU.The following options are available:TracBack converts the track log data in memory into an inverted route (of up to 30 way-points) and begins navigation along the route. See pages 52-53.Save Active Log extracts up to 250 of the most significant points along the active log,saves this information as a ‘saved log’, and clears the active log. Up to 10 saved logs maybe stored in memory, along with a 13-character name. The default name is the date thelog was saved, but you can specify any name you wish.To rename a saved log:1. Highlight the saved log you wish to rename and press ENTER. An information box appears, show-ing the name of the saved log, the number of points in the track log and the total distance covered.2. Highlight the track log name field and press ENTER.3. Use the rocker keypad to enter the new name for the saved log. Press ENTER when finished.Clear Active Log / Delete Saved Log clears the selected track log, active or saved, frommemory. Highlight the ‘Active Log’ to display the ‘Clear Active Log’ option, or highlightany of the ‘Saved Logs’ to display the ‘Delete Saved Log’ option. You should select the‘Clear Active Log’ option at the beginning of any trip where you’ll want to convert thetrack log data into a TracBack route. See pages 52-53.To delete a track log:1. Highlight the track log you wish to delete (active or saved) on the Track Logs Page, and pressMENU to display the Track Log Options.2. Highlight ‘Clear Active Log’ or ‘Delete Saved Log’ and press ENTER.3. Press ENTER again to confirm (or press QUIT to cancel).The Track Logs Page showsavailable memory for theactive log (the log currentlybeing recorded) and lists anysaved track logs.From the Track Logs Page,press ENTER to view theTrack Log Options.64REFERENCEMain Menu: Track Logs