6. To edit the route from the map display, press MENU from the Route Plan Page.Highlight ‘Show Map’ and press ENTER. Use the rocker keypad to place the cursor onthe desired waypoint and press MENU. A pop-up menu appears. Select the desiredoption and press ENTER. If ‘Move’ is selected, move the cursor to the desired locationand press ENTER to accept the change.Route PlanningThe Route Plan Page also displays trip planning information for each leg or theentire route. Available information includes desired course, time to waypoint, distanceto waypoint, required fuel and sunrise/sunset times at the waypoint location.To use the trip planning features:1. To select the desired planning figure, highlight the desired route from the Route Listand press ENTER to display the Route Plan Page. One of ten available planning figuresappears to the right of each route waypoint. Use the LEFT/RIGHT keys on the rockerkeypad to select the desired item.2. To enter planning information, Press MENU and select ‘Setup Plan’ from the optionslist. Enter the figures for speed, fuel flow, departure time and departure date. PressQUIT to return to the Route Plan Page.NOTE: Fuel flow rates on your GPS III are measured in “units per hour”. Systemsetting changes for units of measure (statute, nautical or metric) do not affect the fuelflow measure. You should enter fuel flow rates based upon available information foryour vehicle (operator’s manual, performance specifications, etc.) and make note ofthe desired units of measure (gallons, liters, etc.)The ‘Show Map’ option allowsyou to change the route fromthe map display. Place thearrow on the point affected bythe change and press MENU.With the Route Plan Page dis-played, use the LEFT/RIGHTkeys on the rocker keypad toselect the trip planning features.Press MENU and select ‘SetupPlan’ to define departure time,fuel usage and speed.58REFERENCERoute Editing / Planning#?