Garmin GPSMAP 190-01120-00 Owner's Manual

Also see for GPSMAP 6008: Technical reference Important safety information Supplement Owner's manual Declaration of conformity

Contents

Garmin GPSMAP 190-01120-00 Owner's Manual Manual pdf 116 page image

0 GPSMAP® 6000/7000 Series Owner’s ManualDigital Selective CallingMan-Overboard Distress Calls Initiated from a VHF RadioWhen your Garmin chartplotter is connected to a Garmin NMEA 2000-compatible radio, andyou initiate a man-overboard DSC distress call from your radio, your Garmin chartplotter showsthe man-overboard screen and prompts you to navigate to the man-overboard point. If you havea Garmin autopilot system connected to the network, your chartplotter prompts you to start aWilliamson’s turn to the man-overboard point.If you cancel the man-overboard distress call on the radio, the chartplotter screen prompting you toactivate navigation to the man-overboard location disappears.Man-Overboard Distress Calls Initiated from the ChartplotterWhen your Garmin chartplotter is connected to a Garmin NMEA 2000-compatible radio and youactivate navigation to a man-overboard location, the radio shows the Distress Call page so you canquickly initiate a man-overboard distress call.On the radio, press and hold the DIStReSS key for at least three seconds to send the distress call.For information on placing distress calls from your radio, see your Garmin VHF Radio Owner’sManual. You can mark an MOB and navigate to it (page 34).Position TrackingWhen you connect your Garmin chartplotter to a VHF radio using NMEA 0183, you can trackvessels that send position reports. This feature is also available with NMEA 2000, provided that thevessel sends the correct PGN data (PGN 129808; DSC Call Information).Every position report call received is logged in the DSC list (page 108).Viewing a Position Report1. From the Home screen, select Information > DSC List.2. Select a position-report call.3. Select Review.4. Select Next Page or Previous Page to switch between details of the position report and aNavigation chart marking the location.Calling a Tracked VesselSee “Making an Individual Routine Call” (page 113).Navigating to a Tracked Vessel1. From the Home screen, select Information > DSC List.2. Select a position-report call.3. Select Review > Navigate to.4. Select Go to or Route to (page 32).Creating a Waypoint at the Position of a Tracked Vessel1. From the Home screen, select Information > DSC List.2. Select a position-report call.3. Select Review > Next Page > Create Waypoint.