Garmin GPSMAP 190-01120-00 Owner's Manual

Also see for GPSMAP 6008: Technical reference Important safety information Supplement Owner's manual Declaration of conformity

Contents

Garmin GPSMAP 190-01120-00 Owner's Manual Manual pdf 40 page image

GPSMAP® 6000/7000 Series Owner’s ManualNavigation3. Review the course indicated by the magenta Auto Guidance line.Note: A gray line within any part of the magenta line indicates that Auto Guidance cannotcalculate part of the Auto Guidance line. This is due to the minimum safe water depth and theminimum safe obstacle height settings (page 59).4 Follow the magenta line, steering to avoid land, shallow water, and other obstacles.WaypointsYou can store up to 5000 waypoints with a user-defined name, symbol, depth, water temperature,and comment for each waypoint.Marking Your Present Location as a WaypointFrom the Home screen, select Mark.Creating a Waypoint at a Different Location1. From the Home screen, select Information > User Data > Waypoints > New Waypoint >Move.2. Indicate the location of the waypoint:Select Use Chart to move the waypoint while viewing a chart. For the GPSMAP 6000 series,use the Rocker to select a new location on the chart. For the GPSMAP 7000 series, touch anew location on the chart. Select Move Waypoint.Select enter Position to move the waypoint using coordinates. For the GPSMAP 6000 series,use the Rocker to enter the coordinates of the new location. For the GPSMAP 7000 series,use the on-screen keyboard. Select Done.Marking and Navigating to an MOB LocationWhen you mark a waypoint, you can designate it as a man overboard (MOB) location.From any screen, select Mark > Man overboard.An international MOB symbol marks the active MOB point and the chartplotter sets a courseback to the marked location using the Go To feature.Viewing a List of all WaypointsFrom the Home screen, select Information > User Data > Waypoints.Editing a Saved Waypoint1. From the Home screen, select Information > User Data > Waypoints.2. Select a waypoint.3. Select Review > edit.4. Complete an action:Select Name. For the GPSMAP 6000 series, use the Rocker to change the name. For theGPSMAP 7000 series, use the on-screen keyboard. Select Done.Select Symbol. Select a new symbol.Select Depth. For the GPSMAP 6000 series, use the Rocker or the Numeric Keypad tochange the depth. For the GPSMAP 7000 series, use the on-screen keyboard. Select Done.•••••