Garmin GPSMAP 190-01120-00 Owner's Manual

Also see for GPSMAP 6008: Technical reference Important safety information Supplement Owner's manual Declaration of conformity

Contents

Garmin GPSMAP 190-01120-00 Owner's Manual Manual pdf 64 page image

GPSMAP® 6000/7000 Series Owner’s ManualDevice ConfigurationTurning the Chartplotter On AutomaticallyFrom the Home screen, select Configure > System > Auto Power Up.When you select on, the chartplotter automatically turns on whenever power is applied. Whenyou select off, the chartplotter must be turned on with the Power key.Note: If Auto Power Up is on and the chartplotter is turned off using the Power key, andpower is removed and reapplied within less than two minutes, you may have to press thePower key to restart the chartplotter.Display ConfigurationSetting the SoundYou can set when the chartplotter makes audible sounds.1. From the Home screen, select Configure > System > Beeper/Display > Beeper.2. Complete an action:Select Alarms only to have the chartplotter beep only when alarms are triggered (default).Select Key and Alarm to have the chartplotter beep when keys are pressed and when alarmsare triggered.Setting the LanguageYou can select the language that appears on the chartplotter.1. From the Home screen, select Configure > Preferences > Language.2. Select a language.Navigation PreferencesRoute SettingsSelecting a Route Label TypeYou can select the type of labels shown with route turns on the map.1. From the Home screen, select Configure > Preferences > Navigation > Route Labels.2. Complete an action:Select Show Name to identify route turns using waypoint names.Select Show Number to identify route turns using numbers, such as Turn 1 and Turn 2.Configuring Route Turn TransitionsYou can set how much time or how far before a turn in a route that you transition to the next leg.Raising this value can help improve the accuracy of the autopilot when navigating a route or an AutoGuidance line with many frequent turns, or at higher speeds. For straighter routes or slower speeds,lowering this value can improve autopilot accuracy.1. From the Home screen, select Configure > Preferences > Navigation > turn transition >Activation.2. Complete an action:Select time. Select Change time. For the GPSMAP 6000 series, use the Rocker orthe Numeric Keypad to enter the time. For the GPSMAP 7000 series, use the on-screenkeyboard.•••••