Garmin GPSMAP 190-01120-00 Owner's Manual

Also see for GPSMAP 6008: Technical reference Important safety information Supplement Owner's manual Declaration of conformity

Contents

Garmin GPSMAP 190-01120-00 Owner's Manual Manual pdf 61 page image

GPSMAP® 6000/7000 Series Owner’s Manual Almanac, Environmental, and On-boat DataViewing VideoThe chartplotter can show video if you are connected to one or more video sources using thesupplied video cable. A GPSMAP 7015 or 7215 chartplotter can also display real-time data from aPC if the chartplotter is connected to the PC through the VGA input port (page 2). See the GPSMAP6000/7000 Series Installation Instructions for details.From the Home screen, select Information > Video.Selecting a Video Source1. From the Home screen, select Information > Video > Menu.2. Select Source.3. Indicate the source of the video feed:For the GPSMAP 6008, 6208, 6012, 6212, 7012, or 7212, select Video 1 or Video 2 to displayvideo input. For the GPSMAP 7015 or 7215, select Video 1, Video 2, Video 3, or Video 4.For the GPSMAP 7015 or 7215, select S-Video if you are using an S-Video connector.For the GPSMAP 7015 or 7215, select VGA Input to display real-time data from a PC. Thechartplotter display mimics the appearance of a computer monitor, and does not containHome, Mark, or Menu buttons.For the GPSMAP 7015 or 7215, select Quad Video to display four RCA video inputssimultaneously.Configuring the Video AppearanceBefore you can configure the video appearance, you must set the video Source setting to S-Video,Video 1, Video 2, Video 3, Video 4, or Quad Video (page 55).1. From the Home screen, select Information > Video > Menu.2. Complete an action:Select Aspect > Stretch to show the video using a stretched aspect ratio. The video cannot bestretched beyond the dimensions provided by the connected video device, and it may not fillthe entire screen.Select Aspect > Standard to show the video using a standard aspect ratio.Select Brightness. Select Up, Down, or Auto.Select Saturation to adjust the color saturation. Select Up, Down, or Auto.Select Contrast. Select Up, Down, or Auto.Select Standard. Select the source format of the video (PAL or NtSC). Select Auto to allowthe chartplotter to select the source format automatically.Alternating Among Multiple Video SourcesIf you have two or more video sources, you can alternate between them using a specific timeinterval.1. From the Home screen, select Information > Video > Menu > Source > Alternate2. Select the amount of time each video appears.••••••••••