6 GPSMAP® 6000/7000 Series Owner’s ManualAppendixViewing the Event LogThe event log shows a list of system events.From the Home screen, select Configure > System > System Information > event Log.Saving System Information to a Memory CardYou can save system information to a memory card as a troubleshooting tool. A Garmin ProductSupport representative may ask you to use this information to retrieve data about the marinenetwork.1. Insert a memory card into the SD card slot on the chartplotter.2. Select Configure > System > System Information > Save to Card.3. Remove the memory card.Restoring the Original Chartplotter Factory SettingsNote: This procedure deletes all settings information you have entered.1. From the Home screen, select Configure > System > System Information > Factory Settings >Reset.2. Select Yes.Communication with Wireless DevicesConnecting a Wireless DeviceYou can allow wireless devices, such as a remote control or an optical mouse, to communicate withthe chartplotter.From the Home screen, select Configure > Communications > Wireless Devices > NewConnections > Yes.Disconnecting a Wireless Device1. From the Home screen, select Configure > Communications > Wireless Devices.2. Select a wireless device.3. Select Disconnect.Garmin Marine NetworkThe Garmin Marine Network allows you to share data from Garmin peripheral devices with Garminchartplotters quickly and easily. You can connect a GPSMAP 6000/7000 series chartplotter to aGarmin Marine Network to receive data from and share data with other Marine Network-compatibledevices and chartplotters.Transferring Data over the Garmin Marine NetworkSee “Chartplotter Data Management” (page 69).Configuring Networked DevicesSee “Networked Device Configuration” (page 71).
