4 Trail Guide ™ Owner’s ManualENGETTING STARTED > VEHICLE INSTALLATIONVehicle InstallationYou can install and store the Trail Guide in the dealer-installedvehicle mount. The Trail Guide runs off power from your vehiclewhen the ignition is turned on. Be sure the vehicle ignition isturned off before you install or remove the unit fromthe mount.To install the Trail Guide in the mount:1. Flip up the GPS antenna on the back of the Trail Guide.2. Position the unit directly above the vehicle mount and lineup the sides of the unit with the sides of the mount.3. Slide the unit straight down until it clicks into place.To remove and store the Trail Guide:1. Pull the Trail Guide straight up and out of the vehicle mount.2. Store the Trail Guide in the slot behind the vehicle mount.Pull down the mount door to hide the unit from sight.
