Trail Guide ™ Owner’s Manual 39ENC USTOMIZING YOUR TRAIL GUIDE > C HANGING THE TRACK SETUPChanging the Track SetupAs you travel, the Trail Guide automatically records your path inthe Track Log, creating an electronic “bread crumb” trail. Thisfeature can be enabled or disabled from the Track Setup page. Bydefault, it is enabled.Press MENU two times, highlight Track Setup, and press OK.Track Recording—select Enabled to record tracks or Disabled tostop tracks from being recorded.Wrap When Full—select On to allow new track points to replacethe oldest track points once the log is full. If set to Off, no newtracks are added until the Track log is cleared.Record Interval—sets the interval at which track points arerecorded. With Auto, track points are recorded using a formula andthe setting you choose in the Resolution field.Resolution—selects the frequency at which you want track pointsto be recorded based on how you set Record Interval (above).Higher resolutions cause the track log to fill up more quickly.Percentage Full—shows the percentage of track memory used.Clear Track—clears all of the points of the track log.To restore these settings, press the MENU key, highlight RestoreSettings, and press OK.
