GCL-GCXGCL-GCXManual ReleaseNOTE: In case of power failure, door can be operated manually.The operator can be disconnected from door by pulling red pull rope attached toDrop Release Lever to allow opening door. FIG. 8.FIG. 8.• When door is in manual operation, limit switch setting is not affected.• Releasing pull rope will re-engage operator.Figure 8FigureDROP RELEASE LEVER4.31) Install Release Cord.2) Locate and install the wall control.3) Locate and install Warning Placard. FIG. 9.Warning PlacardMUST BE ATTACHEDto push button.111735 00 1(install release cord here)9ADJACENT4) Remove four (4) self-tapping screws from front panel of the enclosure andremove front panel to expose control circuits and allow for installation ofany optional accessory board.towww.geniecompany.com 08-12Counter Door Operator