Genie GCL-GCX Manual 

Also see for GCL-GCX: Product guide Specifications

Genie GCL-GCX Manual  Manual pdf 15 page image

GCL-GCX1) For one 3 - button installation, make connections asshown in Fig. 3.2) For single button accessory controls, make connections asshown in Fig. 4.3) For a multiple 3 - button installations, make connections asshown in Fig. 5.NOTE: If an External STOP button is NOT being installed, a jumper wiremust be installed between the “STOP” AND “GND” terminals as shown.NOTE: Long Distance Relay Kit wiring is not required for longdistance control runs and should not be usedWall ControlWARNING:• Wall Control(s) must be located so that the door is within sight ofthe user.• Attach the Warning placard adjacent to the Wall Control. Fig. 3A.• Attach the Caution Label adjacent to the Wall Control. Fig. 3B.WARNING:If momentary contact control is to be used, an external monitored reversingdevice such as a photocell system or sensing edge switch must be used. Seepages 5.6-5.7 for installation of entrapment protection devices.NOTE:JUMPER BETWEENSTOP AND GNDTERMINALS MUSTBE REMOVED3-BUTTONSTATIONCONTROL SIGNAL TERMINAL STRIPOPEN CLOSE STOP GND3-BUTTONSTATIONOPENCLOSESTOPOPENCLOSESTOPFigure 41-BTNSTATIONKEYSWITCHSTATIONCARDREADEROPEN/CLOSEPULL SWITCHCONTROL SIGNAL TERMINAL STRIPODCSTBGNDSTOP 1-BTNFigure 5OPENCLOSESTOP3-BUTTONSTATIONCONTROL SIGNAL TERMINAL STRIPNOTE:JUMPER BETWEENSTOP AND GNDTERMINALS MUSTBE REMOVEDOPEN CLOSE STOP GNDFigure 311 35 0 1EntrapmentWarningPlacardFigure 3AFigure 3B CAUTIONTo prevent the motor protector from tripping,do not exceed 4 door operations per hour.For light-duty use ONLYNot for residential use. P/N 111980.00015.4www.geniecompany.com 08-12Counter Door Operator