Troubleshooting 8-9 Make sure that the SSID setting is the same for every WLAN devicein the network. Your computer is not recognizing changes. Restart the computer. Make sure that the IP address or subnet mask setting is correct.I cannot communicate with the computer in the network whenInfrastructure mode is configured. Make sure that the Access Point your computer is associated with ispowered on and all the LEDs are working properly. If the operating radio channel is in poor quality, change the AccessPoint and all the wireless station(s) within the BSSID to another radiochannel. Your computer may be in an out-of-range situation. Move yourcomputer closer to the Access Point it is associated with. Make sure that your computer is configured with the same securityoption (encryption) to the Access Point. Use the Web Manager/Telnet of the Access Point to check whether itis connected to the network. Reconfigure and reset the Access Point.I cannot access the network. Make sure that the necessary driver(s) is correctly installed. Make sure that the network configuration is appropriate. Make sure that the user name or password is correct. You have moved out of range of the network. Turn off power management.Modem ProblemsThe modem does not work. Make sure that the modem driver is correctly installed.
