Operating Your Computer 2-14Term ActionDrag anddropPress lightly on the touchscreen and move your finger/touchsreen pen until you reach your destination (drag).Finally, release your finger/touchscreen pen (drop) whenyou finish dragging your selection to the destination. Theobject will drop into the new location.Touchscreen CalibrationTo calibrate your touchscreen display, perform the following steps:1. Click the PenMount monitor icon located on the Windows system trayto bring up the PenMount Control Panel.2. Select the Standard Calibration folder and click OK.3. If you need 4, 9, 16, and 25 dots of calibration, click on AdvancedCalibration.4. Click on the four sides (points) and the plus-sign “+” on the screen tocomplete calibration of your touchscreen pen for use on thecomputer.NOTE: You may encounter cursors that shifts by itself when using your computer in hightemperature or high humidity environments. After performing touchscreen calibration, VGA extended mode is not supported.
