98FIC/DFICH3C MSR router series uses modular design and supports a wide range of flexible interface modules(FICs) and double flexible interface modules (DFICs). These interface modules provide abundantinterfaces, including synchronous/asynchronous serial interface, Ethernet interface, E1/T1, ISDNBRI/PRI, audio interface, and Layer 2 switching interface.Among these FIC/DFIC interface modules, Ethernet switching modules FIC-16FSWP andDFIC-24FSWP are PoE-capable. When installed on a PoE router, they can provide –48 VDC powerto remote PDs (such as IP phone, WLAN AP, and network camera) through straight-through networkcables.Ethernet switching module• FIC-16FSW• FIC-16FSWP• DFIC-24FSW• DFIC-24FSWPFIC-16FSW/FIC-16FSWP/DFIC-24FSW/DFIC-24FSWPIntroductionThe 16/24-port 10/100 Mbps Ethernet Layer 2 switching MIM interface modules(FIC-16FSW/FIC-16FSWP/DFIC-24FSW/DFIC-24FSWP) are used on H3C MSR 50 routers. Arouter installed with FIC-16FSW/FIC-16FSWP/DFIC-24FSW/DFIC-24FSWP modules can work as aswitching/routing integrated device on a small-sized enterprise network to connect PCs and networkdevices inside the network.A FIC-16FSW/FIC-16FSWP interface module provides the following interfaces:• 16 × 10/100 Mbps RJ-45 ports• 1 × 10/100/1000 Mbps RJ-45 copper port• 1 × SFP fiber port (fiber ports and GE copper ports share the MAC layer)A DFIC-24FSW/DFIC-24FSWP interface module provides the following interfaces:• 24 × 10/100 Mbps RJ-45 ports• 2 × 10/100/1000 Mbps RJ-45 copper ports• 2 × SFP fiber ports (fiber ports and GE copper ports share the MAC layer). By default, thecopper ports take effect.The modules support:
