77However, as TCPAM uses the band starting from 0 Hz for data transmission, G.SHDSL cannot sharethe same line with POTS or ISDN just like what ADSL has done.The MIM-1G.SHDSL module supports:• Manual G.SHDSL line activation/deactivation and easy-to-use fault isolation tools• G.992.1 interface standard and autosensingInterface specificationsTable 105 Interface specificationsItem DescriptionConnector RJ-11Number of connectors 1Interface standard G.991.2Interface rateIn single-pair mode, supports the sending/receiving independentsymmetric speed in the range 192 kbps to 2304 kbps, with the steplength being 8 kbps.Cable Telephone cableSupported service G.SHDSL access over telephone linesInterface LEDsFigure 83 MIM-1G.SHDSL panelTable 106 LED descriptionLED DescriptionLINK • Off: No link is present;• On: A link is present.ACT • Off: No data is being transmitted or received;• Flashing: Data is being received or/and transmitted.Interface cables and the connection methodsFor more information about G.SHDSL interface cables and the connection methods, see "G.SHDSLinterface."ISDN BRI interface module• MIM-4BSE
