189Figure 192 Connecting a service provider S/T interface cable to a BSE interface moduleG.SHDSL interfaceAppearance and applicable models of the G.SHDSL interface adapter cableTable 234 Appearance and applicable models of the G.SHDSL interface adapter cableCable Appearance Applicable models4-wire Y typeG.SHDSLinterfacecable1 × RJ-11 (4 wire) < ---- > 2 × RJ-11 (2 wire)MIM-1SHL-4WFIC-1SHL-4W4-wire I typeG.SHDSLinterfacecable 1 × RJ-11 (4 wire) < ---- > 1× RJ-11 (4 wire)MIM-1SHL-4WMIM-1G.SHDSLFIC-1SHL-4WFIC-1G.SHDSLConnecting a MIM-1SHL-4W interface module cable• Connect the 4-wire Y type G.SHDSL interface cable as follows:One end of the cable provides one RJ-11 connector, the other end of the cable provides twoRJ-11 connectors which can be connected to two 2-core telephone cables.a. Connect the end with only one RJ-11 connector of the cable to RJ-11 interface on theMIM-1SHL-4W interface moduleb. Connect the other end of the cable to the network device.• Connect the 4-wire I type G.SHDSL interface cable as follows:Each end of the cable provides one RJ-11 connector which can be connected to one 4-coretelephone cable.