H3C S12500 Installation Instructions Manual

Also see for S12500 Series: Installation guide Quick start guide Software Upgrade Configuration Examples Interface configuration guide

Contents

B-93) The serial number on the HUB, the network port number of the agent and the location ofstand-alone server should be specified according to actual connection.Example of the LabelFigure B-10 shows the label on the Ethernet cable:Figure B-10 Example of the label on the Ethernet cable“A01-03-10-05” indicates that on the local end of the Ethernet cable is connected with Ethernet Port 05,Slot 10, Frame 03 of the cabinet on Row A, Column 01 in the machine room.“B02-03-12” indicates that the opposite end of the Ethernet cable is connected with Ethernet Port 12,Frame 03 of the cabinet on Row B, Column 02 in the machine room.Engineering Labels for Optical FibersThese labels are affixed to the optical fibers that connect the optical interfaces on the boards in a frame,or on the device boxes. There are two types of labels for optical fibers: one is for the fiber that connectsthe optical interfaces on two devices, the other is for the fiber that connects the device and the OpticalDistribution Frame (ODF).Labels for the Fiber that Connects Two DevicesMeaning of the labelTable B-3 shows the information on both sides of the labels affixed to the optical fiber that connects twodevices.Table B-3 Information on labels affixed to the fiber between two devicesContent Meaning ExampleMN: cabinet number For example, A01B: frame number Numbered in top-down order with two digits,for example, 01C: physical slot number Numbered in top-down and left-right orderwith two digits, for example, 01D: optical interface number Numbered in top-down and left-right orderwith two digits, for example, 05MN-B-C-D-R/TR: optical receiving interfaceT: optical transmitting interface —