H3C S12500 Installation Instructions Manual

Also see for S12500 Series: Installation guide Quick start guide Software Upgrade Configuration Examples Interface configuration guide

Contents

5-13z TFTP update procedureStep1 Connect the switch to a PC where the desired file is located via the management Ethernet port. In thiscase, you should know the IP address of the PC. At the same time, connect the switch to an external PC,which can be the same one that contains the desired file, via the console port.Step2 Run the TFTP Server program on the PC connected to the management Ethernet port, and specify thepath for updating the application files.Step3 Run the terminal emulation program on the PC connected to the console port, and boot the switch toaccess the BootWare menu.Step4 Select 3 in the BootWare menu. Press Enter and the system will access the Ethernet submenu.===================================================|Note:the operating device is cfa0 ||<1> Download Application Program To SDRAM And Run ||<2> Update Main Application File ||<3> Update Backup Application File ||<4> Update Secure Application File ||<5> Update User Private File ||<6> Modify Ethernet Parameter ||<0> Exit To Main Menu || |==========================================================================Enter your choice(0-6):6Step5 Enter 6 in the Ethernet submenu to modify the Ethernet interface parameters. The system displays:===================================================|Note: '.' = Clear field. || '-' = Go to previous field. || Ctrl+D = Quit. |==========================================================================Shortcut key . is used to clear the current input; shortcut key - is used to return to the previous field.Shortcut key Ctrl+D is used to quit the parameter setting page.Protocol (FTP or TFTP) :TFTPLoad File Name :bootware:test.binTarget File Name :bootware:test.binServer IP Address :192.168.1.1Local IP Address :192.168.1.253Gateway IP Address :0.0.0.0Step6 After you provide the required information, the system accesses the Ethernet interface submenu again:===================================================