H3C S3100 Series Command Manual

Also see for S3100 Series: Configuration Command manual Operation manual Installation manual Command manual

Contents

H3C S3100 Series Command Manual Manual pdf 21 page image

Command Manual (For Soliton) – Stack-ClusterH3C S3100 Series Ethernet SwitchesChapter 2 HGMP V2 ConfigurationCommands2-13DescriptionUse the ntdp timer command to configure the interval to collect topology informationperiodically.Use the undo ntdp timer command to restore the default interval.By default, this interval is one minute.After the interval is set to a non-zero value, the switch will collect topology informationperiodically at this interval. You can also use the ndp explore command to start atopology collection process manually.Note that:z Only the management switch can collect topology periodically, and a memberswitch cannot. However, you can use the ndp explore command on the memberswitch to start a topology collection process manually.z After a cluster is set up, the management switch will collect the topologyinformation of the network at the topology collection interval you set andautomatically add the candidate switches it discovers into the cluster.z If you do not want the candidate switches to be automatically added into thecluster, you can set the topology collection interval to zero, and use theadd-member command to add the candidate switches to the cluster manually.Examples# Set the topology collection interval to 30 minutes. system-viewSystem View: return to User View with Ctrl+Z.[aaa_0.Sysname] ntdp timer 302.2.7 ntdp timer hop-delaySyntaxntdp timer hop-delay timeundo ntdp timer hop-delayViewSystem viewParameterstime: Device forwarding delay in milliseconds. This argument ranges from 1 to 1,000.DescriptionUse the ntdp timer hop-delay command to set the delay for devices to forwardtopology collection requests.