H3C S3100 Series Command Manual

Also see for S3100 Series: Configuration Command manual Operation manual Installation manual Command manual

Contents

H3C S3100 Series Command Manual Manual pdf 54 page image

Command Manual (For Soliton) – Stack-ClusterH3C S3100 Series Ethernet SwitchesChapter 2 HGMP V2 ConfigurationCommands2-46Note:You can only use this command on the cluster administrative device.If the device to be added to the blacklist is a member of the cluster, the execution of theblack-list add-mac command will remove the device from the cluster and then add it tothe cluster blacklist. In this case, the black-list add-mac command is equivalent to thedelete-member member-id to-black-list command.Examples# Add the device with the MAC address 0010-3500-e001 to the blacklist. system-viewEnter system view, return to user view with Ctrl+Z.[aaa_0.Sysname] cluster[aaa_0.Sysname-cluster] black-list add-mac 0010-3500-e001# Delete all addresses in the current cluster blacklist.[aaa_0.Sysname-cluster] black-list delete-mac all2.4.2 display cluster base-membersSyntaxdisplay cluster base-membersViewAny viewParametersNoneDescriptionUse the display cluster base-members command to display the information about allthe devices in the base cluster topology, such as member number, name, MAC address,and the current status of each device in a cluster.Examples# Display the information about all the devices in the base cluster topology. display cluster base-membersSN Device MAC Adress Status0 aaa_0.Sysname 000f-e200-30a0 UP1 aaa_1.S3100 000f-e200-86e4 UP