Command Manual (For Soliton) – Stack-ClusterH3C S3100 Series Ethernet SwitchesChapter 2 HGMP V2 ConfigurationCommands2-41configuration file backup of the cluster members. For TFTP server rights and directoryconfiguration, refer to the user guide of the TFTP server software.Related commands: tftp put, tftp-server.Note:z You need to specify the cluster keyword completely in the command.z For description of other parameters of the tftp command, refer to theFTP-SFTP-TFTP part of the manual.Examples# Download file LANSwitch.app from the shared TFTP server of the cluster to theswitch and save it as vs.app.<123_1.Sysname> tftp cluster get LANSwitch.app vs.app2.3.23 tftp putSyntaxtftp { cluster | tftp-server } put source-file [ destination-file ]ViewUser viewParameterscluster: Uploads files through the shared TFTP server of the cluster.tftp-server: IP address or host name of the TFTP server.source-file: File name to be uploaded to the shared TFTP server.destination-file: Name of the file to which the uploaded file will be saved in the storagedirectory of the TFTP server.DescriptionUse the tftp put command to upload a file from the switch to a specified directory on theTFTP server.You can use the tftp-server command on the management device to configure theshared TFTP server of the cluster, which is used for software version update andconfiguration file backup of the cluster members. For TFTP server rights and directoryconfiguration, refer to the user guide of the TFTP server software.