H3C S3100 Series Command Manual

Also see for S3100 Series: Configuration Command manual Operation manual Installation manual Command manual

Contents

H3C S3100 Series Command Manual Manual pdf 59 page image

Command Manual (For Soliton) – Stack-ClusterH3C S3100 Series Ethernet SwitchesChapter 2 HGMP V2 ConfigurationCommands2-512.4.6 display ntdp single-device mac-addressSyntaxdisplay ntdp single-device mac-address mac-addressViewAny viewParametersmac-address: MAC address of the device whose detailed information is to bedisplayed.DescriptionUse the display ntdp single-device mac-address command to display the detailedinformation, which is collected through NTDP protocol packets, about a single device.The information displayed by the command is similar to that displayed by the displaycluster members command. However, if you want to display information about adevice that is enabled with only NTDP and is not in any cluster, you have to use thedisplay ntdp single-device mac-address command.Examples# Display the detailed information about the switch with the MAC address000f-e200-3956. display ntdp single-device mac-address 000f-e200-3956Hostname : H3CMAC : 000f-e200-3956Hop : 0Platform : H3C S3100-26TP-EI-WIP :Version:H3C Comware Platform Software.Comware Software, Version 3.10Copyright(c) 2004-2007 Hangzhou H3C Tech. Co., Ltd. All rights reserved.S3100-26TP-EI-W S3100-26TP-EI-W-1545Cluster : Candidate switchPeer MAC Peer Port ID Native Port ID Speed Duplex000f-e239-1333 Ethernet1/0/4 Ethernet1/0/10 100 FULL