H3C S3100 Series Command Manual

Also see for S3100 Series: Configuration Command manual Operation manual Installation manual Command manual

Contents

H3C S3100 Series Command Manual Manual pdf 51 page image

Command Manual (For Soliton) – Stack-ClusterH3C S3100 Series Ethernet SwitchesChapter 2 HGMP V2 ConfigurationCommands2-43Examples# Configure shared TFTP server 1.0.0.9 on the management device for the cluster. system-viewSystem View: return to User View with Ctrl+Z.[aaa_0.Sysname] cluster[aaa_0.Sysname-cluster] tftp-server 1.0.0.92.3.25 timerSyntaxtimer intervalundo timerViewCluster viewParametersinterval: Interval (in seconds) to send handshake packets. This argument ranges from 1to 255.DescriptionUse the timer command to set the interval between sending handshake packets.Use the undo timer command to restore the default value of the interval.By default, the interval between sending handshake packets is 10 seconds.In a cluster, the management device keeps connections with the member devicesthrough handshake packets. Through the periodic handshaking between themanagement and member devices, the management device monitors the memberstatus and link status.Note that, you need only execute the command on a management device, which willadvertise the handshake interval setting to all member devices in the cluster.Examples# Set the interval to send handshake packets to 3 seconds. system-viewSystem View: return to User View with Ctrl+Z.[aaa_0.Sysname] cluster[aaa_0.Sysname-cluster] timer 3